Innomedia Gizmo Configuration

From VTwiki

1) Disconnect your WAN port from the gizmo

2) Open your web browser. Go to http://192.168.251.1/Voice_adminPage.htm

3) Login using your admin password. If you do not know the password, try one available at http://gizmopasswords.blogspot.com

4) Turn off provisioning if you have not done this already. To do this, go to NETWORK -> Provisioning setting. Uncheck the "Enable Provisioning" box and hit the "Save and Reboot" button. (After rebooting, you may not be able to login to the admin account since the reboot will default to index.htm. Hit CANCEL, and go to http://192.168.251.1/Voice_adminPage.htm to login.)

5) Go to VOIP -> SIP Proxy and enter these settings:

* SIP Proxy - Enter exactly what was sent in your email from ViaTalk.

* Check "Use Outbound Proxy" box

* SIP Local Signaling Port: 5060

* SIP Domain:

* Registration Expiration time: 60

* Preferred Codecs List: PCMU/8000

* Choose "NONE" for all others.

* Click "Save" button.

6) Go to VOIP -> User Account.

* Choose Line 1 from dropdown

* User ID: Your 11-digit phone number

* Password: From email

* User Name: Same as User ID above

* Authentication ID:

* Click "Save" button

 

- Submitted by ViaTalk Customer. Thank you.